 Last additions - Electrical |
Another '65286 viewsUSDP65Mar 01, 2021
|
|
Terminal board on my '65282 viewsUSDP65Mar 01, 2021
|
|
Wire Routing Help (1965 FLH)210 viewsPic of regulator and relay mounted. Circuit breaker is mounted under the battery tray, right rear cornerpanz4everMar 01, 2020
|
|
Wire Routing Help (1965 FLH)215 views1. There is a 2-wire loom for the rear directional signals that goes from the rear of the bike all the way to the front electrical panel under the nacelle.
2. There is a 4-wire loom that goes from the rear electrical panel (under the downtube for the seat post assembly) to the dash.
3. There is a single wire loom that goes from the relay to the front panel.
4. There is a two-wire loom that goes from the voltage regulator to the generator.
5. There is a single wire loom for the oil pressure gauge to the dash panel. That makes 5 separate wire looms the have to get from the back of the bike to the front of the bike.panz4everMar 01, 2020
|
|
Wire Routing Help (1965 FLH)217 viewsRight now I have the 4-wire loom from the rear electrical panel and the 2-wire loom for the directional signals running along the backbone of the frame and under the seat post T in order to get to their respective spots. With luck I might be able to get one of the single wire looms (thinking oil pressure switch loom) under there as well, but that still leaves 2 looms (voltage regulator to generator wires and relay switch to front panel wire) that I have no idea how to route.panz4everMar 01, 2020
|
|
6306C5A7-681A-4895-BE0C-0C72A7F34717412 viewsCasabaJul 15, 2017
|
|
3ABCE780-5959-468D-935E-FC632A88B4B8358 viewsCasabaJul 15, 2017
|
|
ECAE2042-AFF9-4197-9C20-889EF45C9E07376 viewsCasabaJul 15, 2017
|
|
1947 Headlight connections393 viewsFlatHeadSixDec 15, 2016
|
|
1947 Frame terminals under seat445 viewsFlatHeadSixDec 15, 2016
|
|
|
Genuine 65 only PLASTIC solenoid cover #31444-651861 viewsGENUINE 65 only PLASTIC solenoid cover.UPSRODJan 21, 2012
|
|
|
|
Upload file 
